Beal Industrie Semi-Static Abseil Rope 10.5mm (per metre)

£2.00

Very low stretch so suitable for fixing anchors and for abseiling, but not for use as a climbing rope.

Free UK shipping for orders over £50!
International Shipping available

Beal Industrie Semi-Static Abseil Rope 10.5mm (per metre)

Beal Industrie Semi-Static Abseil Rope 10.5mm (per metre) RRP:
£2.00
10 + In Stock

Static (or more correctly, Semi-Static) ropes are available in 9, 10, 10.5, 11 and 11.5mm, and in lengths of 50, 100, 150 and 200m. 10.5mm x 50m is the most popular combination out of this large range (but we can generally obtain other diameters and lengths to order).

They are very low stretch rope suitable for fixing anchors and for abseiling and ascending using some sort of descender or ascender.

We also sell it in 50m and 200m lengths (see below).

NB1 Static Ropes must not be used for lead climbing or in any situation where a dynamic fall might be taken. They are designed for abseiling and ascending ropes. Due to their low stretch, they are more suitable than climbing rope for this sort of purpose, though of course climbing rope can be used almost as well.

NB2 Static rope should be soaked in water and then dried out slowly before use. This will shrink it by 5%. When ordering by the metre you should therefore order 5% more than you need.

Click "Add", and then select the number of metres that you want. If you want more than one length, please email us with the lengths required and/or write this information in the Special Instructions box as you check out.

Please note that this rope was previously called Antipodes.

Beal Industrie Semi-Static Abseil Rope
Rope Type Diameter Static Strength Weight
Semi-Static 10.5mm
5.1kN 65g/m*

* Total weight of the rope may vary as the rope is often longer than the length stated.

We have placed cookies on your device to help make this website better.

Your order contains no items